HL-100BDX Mobile HF Amplifier
Features:
-
Auto Band Changing capable
-
Complete set of LP filters for each band
-
Auto Senses Tx Band
-
Detects shorts in Antenna during transmision and will go into protection mode
-
ALC output along with Remote Fan Output Power on Back of main amplifier body.
-
Amplifier incorporates built in protection circuitry fro high SWR, even battery reversal.
-
Manual Band changing is also a feature
Description:
The HL-100BDX was designed primarily to work with the Yaesu FT-817 QRP Radio. Although it will work with any radio that outputs 5-10 watts. When connected to an FT-817 via the rear DIN connector the operator has an amplifier that will follow the radio as it chages bands
|
| Specifications: |
| Frequency Band |
3.5MHz ~ 50MHz (160m ~ 6m)
(Including WARC bands) |
| Operating Modes |
SSB / CW / FM /AM |
Typical RF Drive
(full output) |
5W-10W Selectable |
| Output Power |
100W SSB, CW
33W for AM |
| Amplifier Class |
Class AB Push – Pull Circuit |
| RF Power Transistors |
RD70HVF1 x 2 (Mitsubishi) |
| Band Switching |
Tx Sensing |
| Power Requirement |
13.8Vdc at 15A Max |
| Cooling Method |
Passive Heatsink |
| Options |
Controller Cable 6m (HRC-200L) |
| Size |
174w x 56H x 235d (mm) |
| Weight |
2.4kg / 5.3 lbs |
| Production Period |
Unknown |
 Manual
|
