HF Linear Amplifier :: HL-200bdx - 160m~10m Mobile Amp

HL-200BDX

3.5 MHz ~ 29.7 MHz (80m ~ 10m)

Detailed Views and Specifications

HL-200BDX Mobile HF Amplifier

Features:

Main Amplifier can be Installed in Trunk
Compact Seperate Control Head
Auto Senses Tx Band
Multi Input Power Configuration
ALC output along with Remote Fan Output Power on Back of main amplifier body.
Amplifier incorporates built in protection circuitry
Remote seperation cable up to 20ft long available.

Description:

The HL-200BDX was one of THP largest selling mobile amps in the early years of the company. It was well regarded and had very conservative specifications. It's output could be increased to nearly 350W if proper additional fan cooling was provided but we do not recommend you try that hi hi.

Click to enlarge:
Front | Rear | Interior | Left Side | Low Pass Filter Board

Specifications:
Frequency Band	3.5MHz ~ 29.7MHz (160m ~ 6m) (Including WARC bands)
Operating Modes	SSB / CW / FM
Typical RF Drive (full output)	10W-50W-100W Selectable
Output Power	200W at (10W/50w/100w IN) 100W at 5w IN 300W possible at 15w Drv at 10SW
Amplifier Class	Class AB Push – Pull Circuit
RF Power Transistors	THP-120 x 4
Band Switching	Tx Sensing
Power Requirement	13.8Vdc at 40A Max
Cooling Method	Heatsink
Options	Controller Cable 6m (HRC-200L)
Size	Main 180w x 70H x 290D (mm) Head 150w x 35d x 85D (mm)
Weight	Main: 3kg / 6.6 lbs Cnt:.4kg/0.9lb
Production Period	Unknown

Manual